Not every order leaves the warehouse as a full pallet. A lot of them are a few cases of this, a box of that, and a handful of small parts from a shelf near the top of the rack. Picking those by hand from the floor means ladders, rolling stairs and a lot of walking. An order picker solves that by lifting the person up to the shelf, along with a place to set what they pick.
This guide explains what an order picker is, how it works, the main types, how it compares with a forklift and a reach truck, and how to tell if your operation needs one.
Quick Answer
An order picker is a specialized electric warehouse truck designed to help operators select individual products, cases or mixed orders. Low-level models support efficient picking near floor level, while elevated package and high-level models raise the operator to reach upper shelving. Depending on the application, order pickers can support horizontal picking runs, compact parts picking or high-level warehouse operations.
On a conventional forklift, the operator stays at floor level while the forks rise. Low-level order pickers also keep the operator near floor level for horizontal picking. On elevated order pickers, the operator platform rises to bring the picker closer to the goods.
On elevated order pickers, the operator stands in a compartment with controls within reach. On high-level models, the operator compartment rises with the lifting assembly so the picker can retrieve cases from upper rack levels and place them on a pallet or tray. Some models permit controlled travel while elevated, subject to manufacturer operating limits.
Order pickers are designed around the picking workflow. Low-level models may carry one or more pallets during long horizontal picking runs, while compact elevated package pickers use trays or platforms for smaller cartons and parts. Guardrails, gates, fall-protection provisions and automatic speed restrictions vary by model and lifting height; operators must follow the manufacturer’s instructions and applicable workplace requirements.
A low-level order picker resembles a rider pallet truck with a standing platform. It is designed for high-volume horizontal order fulfilment, typically picking from floor-level and lower rack positions. Some configurations offer a raised step or operator platform for additional reach. Noblelift’s OPL25N is a 2,500 kg low-level order picker suited to longer picking runs. Confirm the current Canadian specification sheet for battery and platform options. If the job is simply transporting pallets, an electric pallet truck may be more suitable.
Package pickers are compact elevated machines designed for picking individual cartons, parts and other small goods from shelving. Their size can make them useful in retail back rooms, parts departments and warehouses with limited space. Noblelift’s OPH01E-Li is an example of a lithium-powered package picker, while the OVS series offers another elevated picking option. Dimensions, capacity, lift height and steering functions should be confirmed for the exact Canadian model and configuration.
High-level order pickers, often called man-up order pickers, raise the operator to pick cases from upper racking. They are designed for more demanding warehouse picking applications and may operate in guided narrow aisles. Noblelift’s OPH12-12K is an example of a 1,200 kg high-level order picker. Confirm the available Canadian configuration and its specific fall-protection and travel-control features before selecting equipment.
At the top end, a man-up turret truck combines elevated operator access with full-pallet handling in very narrow aisles. Rotating forks can service racking on either side without turning the entire truck. Noblelift’s OPK is designed for high-density warehouse applications; confirm the model’s rated lift height and picking height for the intended configuration.
Browse the full order picker range to compare models.
All three are lift trucks, but they do different jobs. A counterbalance forklift moves full pallets anywhere, including the dock and the yard. A reach truck stores and retrieves full pallets in high racking. An order picker brings the person to the product.
| Feature | Order picker | Reach truck | Counterbalance forklift |
|---|---|---|---|
| Main job | Picking cases and pieces | Storing full pallets in racking | Moving full pallets, loading trucks |
| Where the operator works | Near floor level (low-level); elevated with platform (man-up) | At floor level | At floor level |
| Typical working height | Near floor level to elevated high-level picking; model-dependent | 8 to 12 m | Up to about 6 m |
| Typical capacity | Varies widely by low-level, package and high-level model | 1,000 to 2,500 kg | 1,500 to 5,500 kg and up |
| Typical aisle width | Depends on truck, load and guidance system | 2.6 to 3.0 m (8.5 to 10 ft) | 3.4 to 4.3 m (11 to 14 ft) |
| Outdoor use | Generally indoor applications; follow model rating | No | Yes |
| Operator fall protection | As required for elevated models and local regulations | Not usually | Not usually |
The short version: if the work is moving whole pallets, you want a forklift or a reach truck. If the work is building orders one case at a time, you want an order picker. Many warehouses run both. For a wider look at every truck type, see our guide to types of forklifts.
Order pickers show up wherever orders are smaller than a pallet:
An order picker is usually worth it when several of these apply:
Picking from the second and third rack levels can double or triple the pick faces in an aisle. That’s often the cheapest way to add capacity before you think about a bigger building. If you’re planning a new layout or adding warehouse software to direct pickers, our system integration team can help plan the equipment around the workflow.
On the other hand, if most of your work is full pallets at the dock, an order picker will sit idle. In that case, a counterbalance forklift or reach truck is the better first purchase.
Working at height changes the safety picture. A few rules matter most:
In Canada, operators must be trained and evaluated on the type of lift truck they use, in line with CSA B335, the Canadian lift truck safety standard, and the rules of your provincial health and safety regulator. Order picker training should cover fall protection and working at height. A forklift ticket alone doesn’t cover it. The Canadian Centre for Occupational Health and Safety has a clear summary of forklift hazards and controls.
An order picker is used to select individual cases or items from warehouse shelving and racking. Low-level models support horizontal picking, while elevated models lift the operator to reach higher pick locations.
It is a specialized type of industrial lift truck, often called an order picker forklift. Unlike a conventional counterbalance forklift, it is designed primarily around the process of building orders from individual items or cases.
On a reach truck, the operator stays at floor level and the forks reach into the rack to store or retrieve full pallets. On an order picker, the operator rises with the load to pick cases and items by hand.
People often call it a cherry picker forklift, but a true cherry picker is a boom lift for working at height outdoors. In a warehouse, “cherry picker” almost always means an order picker.
Low-level models focus on picking near floor level, while compact elevated and high-level order pickers reach progressively higher shelving. Maximum platform, lift and picking heights vary by model; always check the relevant specifications.
Yes. Canadian operators need training and evaluation on the specific type of truck, including fall protection for elevated work. Training on a sit-down forklift doesn’t carry over automatically.
Important factors include picking height, load capacity, aisle width, order volume, battery requirements and the number of operating shifts. Noblelift Canada’s dealer network can help identify an order picker suited to your warehouse layout and picking requirements.
The right order picker depends on picking height, load weight, aisle width and operating shifts. Noblelift Canada offers options for horizontal order fulfilment, compact parts picking and higher-level warehouse applications, including lithium-powered models suited to opportunity charging where specified. Multi-site operators can ask about our national accounts program. Call +1 514-697-0117 or request a quote to get started.